Here, you are looking at the Driven Media 2022-2023 BRZ Reverse Light Overlays.

Unfortunately, Subaru and Toyota decided to use practically the same design for the reverse light on the 2nd generation. It’s a bit of a dated design for a modern-looking car. With this Reverse Light Overlay, it truly blends into the bumper giving the rear end of the car a cohesive appearance while still remaining functional as you can see in the photo with the reverse lights on. Car in photo has LED reverse lights installed.

These overlays are designed and cut using high-quality vinyl to ensure proper fit and finish.

Installation Instructions

• Prior to applying the overlay, make sure the surface is thoroughly cleaned and dry.

• Carefully peel the overlay off of the backing and use the edges of the tail light to line it up. (Each overlay is marked left or right on the backing sheet.)

•  Once you have successfully positioned the overlay where you want it, use a vinyl squeegee or microfiber to remove any air bubbles. 

• We recommend allowing at least 48hrs before washing the car to allow for the adhesive to cure and avoid directly spraying them with a pressure washer.

• The temperature needs to be a minimum of 65°F for proper application.