🎉 Up to 70% Off Selected ItemsShop Sale
HomeStore

Injector Dynamics 1750-XDS Top Feed Fuel Injectors 1750cc 2013-2021 BRZ

Product image 1

Injector Dynamics 1750-XDS Top Feed Fuel Injectors 1750cc 2013-2021 BRZ

The ID1750-XDS is the successor to the ID1700, featuring numerous improvements.

Compared to the 1700, the 1750 offers:

  • Higher Dynamic Flow Rate With no Increase in Minimum Fuel Mass.
  • Better Cylinder to Cylinder Balance at Low Pulsewidths.
  • Improved Pressure Sensitivity.

The ID1750-XDS is the most recent offering from the partnership of Injector Dynamics and Bosch Motorsport. The ID1700 was designed to fill the gap between the ID1300 and the ID2000, and like the ID1300, it features corrosion resistant internals making it compatible with all known automotive fuels.

A unique magnetic circuit, resulting from a lengthy development program, makes the ID1700 immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors. The ID1700 excels at high pressures typical of current automotive systems, and will perform flawlessly in these applications.

The ID1750-XDS was designed to be an all fuel compatible injector, capable of very high flow rates. As such, it will most often be used to deliver E85 to boosted engines, or occasionally, gasoline in extreme high horsepower applications. Neither of these applications requires extended linearity at low flow rates, and so this was given a proportionately lower priority during the design process.

Basic Specifications

  • Nominal Flow Rate – 1728cc/min @ 3.0 Bar (43.5 psi), Using E10 Emissions Certification Fuel at 49 Degrees C (120F)
  • Maximum Differential Fuel Pressure – 7.0 Bar (101.5 psi)
  • Fuel Compatibility – Compatible with Methanol/Ethanol/MTBE/Nitromethane/All Known Hydrocarbon Fuels.
  • Electrical Connector – USCAR

Compatibility With all Automotive Fuels

Another key requirement is compatibility with all automotive fuels.

From MTBE, to ethanol, the X Series are compatible with everything but dirt. Every dimensionally critical part inside of the X Series is made from corrosion resistant material, making them compatible with all fuels, and providing better long term consistency when used with corrosive fuels.

Note: Included with this kit are the clips and pins that fit the Injector Dynamics Injectors. You can either re-pin your factory harness or purchase the optional plug and play adapters

 

$468.93

Original: $1,339.80

-65%
Injector Dynamics 1750-XDS Top Feed Fuel Injectors 1750cc 2013-2021 BRZ—

$1,339.80

$468.93

Product Information

Shipping & Returns

Description

The ID1750-XDS is the successor to the ID1700, featuring numerous improvements.

Compared to the 1700, the 1750 offers:

  • Higher Dynamic Flow Rate With no Increase in Minimum Fuel Mass.
  • Better Cylinder to Cylinder Balance at Low Pulsewidths.
  • Improved Pressure Sensitivity.

The ID1750-XDS is the most recent offering from the partnership of Injector Dynamics and Bosch Motorsport. The ID1700 was designed to fill the gap between the ID1300 and the ID2000, and like the ID1300, it features corrosion resistant internals making it compatible with all known automotive fuels.

A unique magnetic circuit, resulting from a lengthy development program, makes the ID1700 immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors. The ID1700 excels at high pressures typical of current automotive systems, and will perform flawlessly in these applications.

The ID1750-XDS was designed to be an all fuel compatible injector, capable of very high flow rates. As such, it will most often be used to deliver E85 to boosted engines, or occasionally, gasoline in extreme high horsepower applications. Neither of these applications requires extended linearity at low flow rates, and so this was given a proportionately lower priority during the design process.

Basic Specifications

  • Nominal Flow Rate – 1728cc/min @ 3.0 Bar (43.5 psi), Using E10 Emissions Certification Fuel at 49 Degrees C (120F)
  • Maximum Differential Fuel Pressure – 7.0 Bar (101.5 psi)
  • Fuel Compatibility – Compatible with Methanol/Ethanol/MTBE/Nitromethane/All Known Hydrocarbon Fuels.
  • Electrical Connector – USCAR

Compatibility With all Automotive Fuels

Another key requirement is compatibility with all automotive fuels.

From MTBE, to ethanol, the X Series are compatible with everything but dirt. Every dimensionally critical part inside of the X Series is made from corrosion resistant material, making them compatible with all fuels, and providing better long term consistency when used with corrosive fuels.

Note: Included with this kit are the clips and pins that fit the Injector Dynamics Injectors. You can either re-pin your factory harness or purchase the optional plug and play adapters